Visus MPEG-4 DVR Manuel d'utilisateur télécharger pdf (Page 16)

3.2 Turning on the Power

Once the above hardware is properly connected, it is the time to turn on the GV-Hot Swap DVR V2. To

turn on the power, follow these steps:

1. Turn on the monitor.

Figure 7

2. Turn on the AC power switch on the rear panel.

Power On

Figure 8

3. Turn on the main power switch on the front panel.

Power On

Figure 9

The GV-Hot Swap DVR V2 will run a series of self-tests. After two or three minutes, a series of

messages may be displayed as the various hardware and software subsystems are activated. After this

is finished, the GV-System Software (Multicam Surveillance System) should load automatically and

bring you to the main screen with 8 or 16 cameras display.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 57 58

Pas de commentaire

Visus MPEG-4 DVR Manuel d'utilisateur Page 16